HOMMEL-ETAMIC C8000 digiscan

Contour measuring systems with electronic probe arm recognition

 Highlights HOMMEL-ETAMIC C8000 digiscan

 

The C8000 digiscan contour measuring systems provide state-of-the-art technology, assuring safety in the design of the test processes, as well as ease of operation and fully reliable measuring results.

Thanks to intelligent probe arms, the contour probe system detects which probe arm is installed and automatically loads the correct system measuring conditions. This helps prevent operational errors from occurring.

  • Vertical measurement range: 60 or 90 mm
  • Electronic probe arm detection using RFID technology
  • Optional top/bottom probing as well as diameter and thread measurement
  • Reliable measurement of small geometric features
  • Extensive analysis functions
Hommel Etamic C8000 digiscan by Metrology Direct

HOMMEL-ETAMIC C8000 digiscan system features

  • Vertical measuring range/resolution: 60 or 90 mm/50 or 75 nm
  • wavecontour™ digiscan probing system with automatic probe arm detection
  • The use of RFID technology eliminates the need to manage probe arms manually

 

 

  • Motorized probe arm lifting/lowering
  • Adjustable stroke limit • Automatic measuring and evaluation
  • Processing of several profiles
  • Probe arms can be quickly replaced for different measuring tasks
Hommel Etamic C8000 digiscan by Metrology Direct

The probe arms with magnetic holder and electronic probe arm identification are automatically assigned to the right measuring program.

Hommel Etamic C8000 digiscan by Metrology Direct

The probe arms with magnetic holder and electronic probe arm identification are automatically assigned to the right measuring program.

Hommel Etamic C8000 digiscan by Metrology Direct

Dual-tip probe arms enable optional top/bottom probing in one measuring run and are used to determine the inside diameter.

HOMMEL-ETAMIC C8000 digiscan Technical Specifications

Technical Specifications Hommel Etamic C8000digiscan

 Product Kit Content: 

HOMMEL-ETAMIC C8000 digiscan (Art. 1005 0329)

HOMMEL-ETAMIC C8000 digiscan E (Art. 1005 0441)

  • Evaluation computer with 22″ TFT flat-screen display, color printer and CD burner
  • EVOVIS evaluation software for contours
  • wavelift measuring column with motorized height adjustment and travel speed of 0.1–12 mm/s, vertical travel of 400 mm
  • waveline 120 C traverse unit with incremental linear measuring system and 0.1-µm resolution; traverse length of 120 mm; straightness accuracy of < 0.4 µm /120 mm
  • Tilting device for traverse unit with swivel range of ± 45°
  • Granite plate with 10-mm T groove: 780 x 500 mm
  • wavecontour digiscan contour probe with 60 mm measuring range, digital measuring system with 0.05 µm resolution, magnetic probe arm holder, automatic probe arm detection, electronic probe force setting; includes TD-60 probe arm with carbide tip
  • Precision measurement ball and holder
  • MT1 measuring table for holding the workpieces (only with C8000 digiscan)

Want To Discuss Your Requirements?

Looking For Technical Support

Think This Is The Right Solution

Share This